The dashboard of the backup camera :
The backup camera manufacturer dash and start reassembling the first you’re going to grab these open RCA plugs. Suppose you are going to put some black tape on them. So that if they touch anything metal, they don’t cause any Issues. You’ll do the same for any free wires hanging around here. To ensure that nothing shorts so you almost forgot about the microphone, you can see you’ve clipped it up on the a-pillar and ran the wire down Underneath. This trim is behind the dashboard, underneath, and into the back of the radio. If you lose some of the footage from the reassembly, you’re going to splice in some footage you shot from another project.
After that, Backup Camera Manufacturer they’ll start looking at how this thing works now in your case since you had the radio out. If you are going to bolt that back in first now, I’ll bring the environmental control panel back in and bolt that in place. Now, grab the accessory panel with the sockets on it and reconnect all the Wires. They’ll get this positioned and bolted back in place. Now you can bring in the trim bezel and push this back into place. So as you can see, the installation came out with good looks, it fits nicely in here, and nothing looks out of place.
If they haven’t mentioned it already, this photo is a Linux-based system as opposed to an android system, and all that means is that they have a limited subset of functions. If you’re, that’s preferable over an android system that allows you to put almost anything on here.
Android-based system in a car :
The only things that are important to you are what is loaded in the photo. This unit, but if you need more functionality, you should check out one of the toto’s android-based systems. Now having said that looking at the front panel, Backup Camera Manufacturer they’ve got the Date and time displayed prominently here, and they’ve got the four most used buttons in any of these systems’ android auto. The primary radio tuner has Bluetooth audio and apple carplay; the button in the middle is used to dig into the rest of the apps.
As you can see on this screen, in addition to the already available, if you buy the separate module, you don’t have a Subscription. So you didn’t get that module; these options will also light up and become active if you have a USB stick or a micro sd card to plug into one of the slots over here. So you can see from this menu a handful of things they can dig into if they look at system settings; you can see some basic options here for language turning on and off the beep tone.
These options are used for setting up the steering wheel controls; they can do a factory reset, or they can look at the device if you see what kind of software is loaded to back up the menu tree. They just hit the back arrow here to go up looking at display settings. As you can see, they can change the dimming levels during the daytime or nighttime. The panel key lighting can be changed to a few different colors, as shown below. If you set mine back to blue, you can change the wallpaper on the radio to any of these selected items.
English 