The dashboard of the backup camera :
The backup camera manufacturer dash and start reassembling the first you’re going to grab these open RCA plugs. Suppose you are going to put some black tape on them. So that if they touch anything metal, they don’t cause any Issues. You’ll do the same for any free wires hanging around here. To ensure that nothing shorts so you almost forgot about the microphone, you can see you’ve clipped it up on the a-pillar and ran the wire down Underneath. This trim is behind the dashboard, underneath, and into the back of the radio. If you lose some of the footage from the reassembly, you’re going to splice in some footage you shot from another project.
After that, Backup Camera Manufacturer they’ll start looking at how this thing works now in your case since you had the radio out. If you are going to bolt that back in first now, I’ll bring the environmental control panel back in and bolt that in place. Now, grab the accessory panel with the sockets on it and reconnect all the Wires. They’ll get this positioned and bolted back in place. Now you can bring in the trim bezel and push this back into place. So as you can see, the installation came out with good looks, it fits nicely in here, and nothing looks out of place.
If they haven’t mentioned it already, this photo is a Linux-based system as opposed to an android system, and